Facility
  • 50,000 square feet
  • Crane Capacity 30 ton & 75 ton
  • ISO Certified
 
Grinders Single Wheel
  Size Diameter Range Centers Crown Taper
Farrel #81 60” x 480” 16” – 60” 473” Yes Yes
Farrel #74 28” x 192” 2” – 34” 205” Yes Yes
Farrel #06 20” x 100” .75” – 19.5” 96” Yes Yes – Precision
Waldrich Siegen #01 78” x 551”     Yes Yes – Precision
 
Grinders Two Wheel
  Size Diameter Range Centers Crown
Farrel #63 42” x 400 ” 16” – 42 ” 461” Yes
Farrel #59 36” x 244 ” 9” – 36 ” 270” Yes
Farrel #75 32” x 256 ” 10” – 32 ” 284 Yes
Farrel #76 32” x 256 ” 10” – 32 ” 284” Yes
 
Horizontal Boring Bar - (C.N.C)
  Spindle Vertical Horizontal
Toshiba #52 6" , Travel 96" Vertical 461” Horizontal
Farrel Sellers #56 6" 70" Vertical 270” Horizontal
 
Lathes

Lathes - Engine
  Size Swing Over
Ways 		Swing Over
Carriage 		Max Chuck
Diameter 		Centers
Farrel Betts #34 72” x 528 ” 72” 62.625” 72" 528"
Farrel Betts #29 51” x 420 ” 51 ” 38” 41.5" 426"
           

Lathes - Turret
  Spindle
Bore 		Swing Over
Ways 		Swing Over
Carriage 		Max Chuck
Diameter 		Centers
Turret #24 12.75” 37” 37” 32" 104"

Lathes - (C.N.C)
    Swing Over
Ways 		Swing Over
Carriage 		Max Chuck
Diameter 		Centers
Dainichi #27   52” 35.5” 39.375" 157"

Lathes - Honing
  Max Steady
Rest Dia 		Min Steady
Rest Dia 		Min Bore
Diameter		 Max Bore
Diameter		 Stroke
Barnes #50 45” 9” 4” 29.25" 404"
 
Balancer
  Max
Speed 		Max
Dia. 		Min
Dia. 		Weight Center
Min 		Center
Max
Hoffman #95 6300 RPM 60” 8” 150,000 lbs 80" 500"
Scheck Trebel #94 5600 RPM 24” 1.2” 10,000 lbs 20" 130"
 
HVOF Thermal Spray Booth
  Size          
Hoffman #95 60” x 400"          
 
Variable Crown Roll Dynamic Test Stand
Dynamic and Static Oil Testing with Heated Oil

 

 

Facilities

Facility
  • 50,000 square feet
  • Crane Capacity 30 ton & 75 ton
  • ISO Certified
 
Grinders Single Wheel
  Size Diameter Range Centers Crown Taper
Farrel #81 60” x 480” 16” – 60” 473” Yes Yes
Farrel #74 28” x 192” 2” – 34” 205” Yes Yes
Farrel #06 20” x 100” .75” – 19.5” 96” Yes Yes – Precision
Waldrich Siegen #01 78” x 551”     Yes Yes – Precision
 
Grinders Two Wheel
  Size Diameter Range Centers Crown
Farrel #63 42” x 400 ” 16” – 42 ” 461” Yes
Farrel #59 36” x 244 ” 9” – 36 ” 270” Yes
Farrel #75 32” x 256 ” 10” – 32 ” 284 Yes
Farrel #76 32” x 256 ” 10” – 32 ” 284” Yes
 
Horizontal Boring Bar - (C.N.C)
  Spindle Vertical Horizontal
Toshiba #52 6" , Travel 96" Vertical 461” Horizontal
Farrel Sellers #56 6" 70" Vertical 270” Horizontal
 
Lathes

Lathes - Engine
  Size Swing Over
Ways 		Swing Over
Carriage 		Max Chuck
Diameter 		Centers
Farrel Betts #34 72” x 528 ” 72” 62.625” 72" 528"
Farrel Betts #29 51” x 420 ” 51 ” 38” 41.5" 426"
           

Lathes - Turret
  Spindle
Bore 		Swing Over
Ways 		Swing Over
Carriage 		Max Chuck
Diameter 		Centers
Turret #24 12.75” 37” 37” 32" 104"

Lathes - (C.N.C)
    Swing Over
Ways 		Swing Over
Carriage 		Max Chuck
Diameter 		Centers
Dainichi #27   52” 35.5” 39.375" 157"

Lathes - Honing
  Max Steady
Rest Dia 		Min Steady
Rest Dia 		Min Bore
Diameter		 Max Bore
Diameter		 Stroke
Barnes #50 45” 9” 4” 29.25" 404"
 
Balancer
  Max
Speed 		Max
Dia. 		Min
Dia. 		Weight Center
Min 		Center
Max
Hoffman #95 6300 RPM 60” 8” 150,000 lbs 80" 500"
Scheck Trebel #94 5600 RPM 24” 1.2” 10,000 lbs 20" 130"
 
HVOF Thermal Spray Booth
  Size          
Hoffman #95 60” x 400"          
 
Variable Crown Roll Dynamic Test Stand
Dynamic and Static Oil Testing with Heated Oil

 

 
 

Home | About Us | Industries We Serve | Facilities | Services | Products | Downloads | Directions | Contact Us | Disclaimer

Copyright © 2007, SHW Casting Technologies, Inc. All rights reserved.
Site Design By Conquest Consulting.